Maxshine Foam Cutting Pads – Tapered Edge
The Maxshine Tapered Series allows the user to cut swirls and defects on soft and hard painted surfaces quickly and easily.
Used Traditionally with a Cutting Compound as a first step in the correction process.
Centrally attach the Maxshine Cutting Pad on the backing plate of your Dual Action or Rotary Polisher. Place 4-5 pea sized drops around the pad surface and slowly work the compound in to the paint on speed 1/2 (600-900 rpm for Rotary) and Speed Range 3/4 for Dual Action Machines
Spread a 60x60cm area on speed 1 ensuring full coverage.
Increase the Machines speed to 3-4 on your DA and start slowly working the compound into the defects in a cross hatching method with enough pressure to still see the pad rotating slowly.
Continue making these “passes” 3 or 4 times. Wipe off Residue with a soft Microfibre Towel and Inspect your work. Continue if necessary.
The entire range of Maxshine’s Pads are sure to impress. With Quality being the utmost importance whilst still retaining some of the lowest prices offered in Australia.
All of Maxshine’s range of Cutting, Polishing and Finishing Pads are manufactured from Quality Sourced Raw Materials from either Germany, Korea, China or Australia.
The Hook and Loop Backing Material will attach very tightly to all polishing machine backing plates and the adhesive used to secure the Foam Face will not deteriorate or melt if proper techniques are utilised.
Many years of research in German Foam Construction has greatly helped Maxshine Construct some of the best pads on the market.
Try them for yourself and see what all the fuss is about.
Don’t put up with overpriced pads that crumble and fall apart anymore. Use Maxshine’s Pads Over and Over again without failure and store them in the secure packaging pouch for next time!