SGCB Tornador Gun with Brush Head and Cone – Heavy Duty Metal Pipe Edition
With even heavier duty parts for Professional Detailers and Serious DIYers with Constant Daily Use and Abuse.
With Red Anodised Rings, upgraded heavy duty bearing edition and forced driven Metal Spinning Tube; this Tornador is truly an animal of a machine. PROFESSIONAL USE ONLY.
THIS TORNADOR REQUIRES A LARGER TYPE COMPRESSOR RECEIVER TO MAINTAIN CONSTANT AND EFFECTIVE AIR FLOW!!
The SGCB Heavy Duty Tornador Pet Hair and Carpet Cleaning Cone Gun (SGGC032) is the ultimate little tool to remove pet hair and debris from within your carpets and floor mats. Twin Barrel, Heavy Duty high Quality Components.
This Tornador Gun comes with two Removeable and Replaceable Head Brushes. One Small and One large for gently lifting stubborn debris. Two Threaded PVC Bristle Brushes are included and can be used with or without. Simply Unscrew the Tornadors Head Cone and Screw the Robust Threaded Brush Head onto the End.
With Supplied Nitto Type Air Fitting coupled with air from your Compressor you can easily manipulate, lift and blow away Stubborn Hair and Debris using a high pressure pulsing effect.
Made from high Quality Aluminium, Steel and Hard PVC Plastics this Cleaning Tornador Gun will leave you wondering how you ever coped without one!
The carefully Shaped Cone and Combined Heavy Duty Spinning Aluminium Air Tube will give you a great wide reach into tight areas like next to your seats and between Centre Consoles.
Coupled with compressed air from a recommended 2 Bar and 150 litre Minimum Air Receiver; simply pull the trigger and start blowing that Hair and Debris straight out an open door!
A light vacuum may be required after using the gun but will be significantly reduced as the majority of hair and debris will be already removed.
Comes supplied in High Quality SGCB Packaging Box with Instruction Manual, Parts Breakdown Illustartions and 12 Month Manufacturing Warranty
Refract Tip – Follow your Tornador Cone Gun along with a good quality detailing brush to lift the more stubborn debris along dashboard components and air vents!
Refract Safety Tip – Always Wear Eye and Ear Protection whilst using any Pnuematic Tools and Tornadors. These tools are extremely powerful and loud. Never point or let Children operate without the correct safety equipment or supervision.
Never place your fingers or any part of your body come in contact with the Aluminium Spinning Tube. With RPMs at over 10,000 it is sure to cause harm. Keep all loose clothing and Long Hair from being caught in the tools rotation
Care and Maintenance – Always use a moisture filter either in your airline or at Discharge from your compressor. Like with any air tools moisture Is a by product and can slowly contaminate the inner workings of your tools. Apply a thin Machine Oil to internal components regularly and keep debris from building up on rotating parts
-Hang or store your Tornador Via the Body mounted storage hook or in a dry safe place
– To Clean your Tornador Simply Full a bucket with water and emerse the Cone Tube Head. Activate the Tornador for 3-5 Seconds. Remove and Unscrew the Tornadors Cone Tip and Dry internal parts with a clean absorbent towel for Storage.